Choosing a solvent involves considering purity, density, flash point, and vapor pressure. However, there is one number that has a great impact on many aspects of the manufacturing process: the solvent boiling point. Here are a few examples that show how the boiling point of the solvent can affect your manufacturing process.
Boiling Point and Evaporation
The lower the boiling point, the quicker evaporation occurs. For instance, isopentane has a boiling point of approximately 82 degrees Fahrenheit, n-pentane, 97 degrees, n-hexane,156 degrees, and heptane, 209 degrees. Although these differences may seem small at first glance, they are significant in practice. In the summer in Houston, just a few degrees will make a difference between a liquid solvent and a gaseous one.
Low Boiling Points for Foams and Plastics Production
In certain processes, rapid evaporation of solvent is essential. For example, expandable polystyrene foam, which is used in building insulation, coolers, packaging, etc., is produced with the help of pentane. The beads that contain this solvent undergo a steaming process. As a result of boiling, they get expanded to a larger volume. Pentane is widely used in producing polyethylene. The experts at Trecora, a producer of high purity n-pentane, believe this solvent is ideal for polyethylene production because of its stability and low boiling point.
High Boiling Points for Processes Where Slower Evaporation is Required
Sometimes though, quick evaporation of solvent is not required. For instance, paints, coatings, glues, etc. need time to level off before drying. If the solvent evaporates too quickly, the surface can skin, contain bubbles or brush marks. Cleaning and degreasing work in the same way because the solvent has to be wet enough to dissolve the dirt. A high-boiling solvent is usually preferable in these cases.
Costs Associated With Separation of Solvent From The Substance
Usually, there comes a time when the solvent must be removed from the substance through drying, desolventizing, or distillation for recycling. A higher boiling point leads to higher energy consumption in this operation. Nevertheless, low-boiling solvents can be removed faster and thus save energy costs. The downside of low-boiling solvents is their quick evaporation, which means good condensing equipment is required.
Storage and Handling
Low-boiling solvents need additional measures. In warm weather, they tend to generate pressure in barrels and other vessels. That is why containers should be pressure-rated and placed in shaded areas. Moreover, many companies use nitrogen blanketing in order to isolate air in solvent tanks. Low-boiling solvents also have very low flash points, which are often well below zero degrees Fahrenheit. It means that good ventilation and proper grounding (to eliminate risk of ignition from static sparks) are necessary, as well as strict compliance with OSHA requirements and local fire codes. Most solvents are classified as volatile organic compounds and regulated according to the EPA emission guidelines.
Purity Matters
Data sheets provide information about pure substances. The presence of impurities widens the boiling range of the solvent, which leads to unexpected evaporation during the process. This, in turn, causes inconsistency of the results from run to run. Therefore, it is crucial to gather information about the solvent’s distillation range and verify that the products comply with the relevant ASTM standards.
Conclusion
The boiling point of a solvent is one simple figure that says a lot about its properties. It influences evaporation rate, cost of removal, storage conditions and applicability to various jobs. Low-boiling solvents like pentane are suitable for foams and plastics production, while high-boiling ones are usually better for coatings and cleaning. Selecting a solvent that has an appropriate boiling point can greatly enhance the manufacturing process.
